diff --git a/examples/GPIO/Makefile b/examples/GPIO/Makefile
index 399d16eba5d704e10e1ce2a4c0455daf5b06477c..87347371d38e65e7c05f84225b553f957d5d1eca 100644
--- a/examples/GPIO/Makefile
+++ b/examples/GPIO/Makefile
@@ -3,7 +3,7 @@ all : flash
TARGET:=GPIO
CFLAGS+=-DTINYVECTOR
-ADDITIONAL_C_FILES+=wiring.c
+ADDITIONAL_C_FILES+=../../extralibs/wiring.c
include ../../ch32v003fun/ch32v003fun.mk
diff --git a/examples/GPIO_analogRead/Makefile b/examples/GPIO_analogRead/Makefile
index e47191ea6a2a9efea0eb37aa371f0c276ec5f817..a965d90a0e3e624237b8b7234cfce7e09475c44e 100644
--- a/examples/GPIO_analogRead/Makefile
+++ b/examples/GPIO_analogRead/Makefile
@@ -3,7 +3,7 @@ all : flash
TARGET:=GPIO_analogRead
CFLAGS+=-DTINYVECTOR
-ADDITIONAL_C_FILES+=wiring.c
+ADDITIONAL_C_FILES+=../../extralibs/wiring.c
include ../../ch32v003fun/ch32v003fun.mk
diff --git a/examples/GPIO_analogRead/wiring.c b/examples/GPIO_analogRead/wiring.c
deleted file mode 100644
index e0acde1977e48cc74ac45f7b33c123d25e028758..0000000000000000000000000000000000000000
--- a/examples/GPIO_analogRead/wiring.c
+++ /dev/null
@@ -1,238 +0,0 @@
-//#include <stdio.h>
-
-#include "wiring.h"
-#include <stdint.h>
-
-
-
-enum GPIOports getPort (enum GPIOpins pin) {
- if (pin <= pin_A2) {
- return port_A;
- }
- else if (pin <= pin_C7) {
- return port_C;
- }
- else if (pin <= pin_D7) {
- return port_D;
- }
- return port_none;
-}
-
-
-
-void portEnable(enum GPIOports port) {
- // Enable GPIOs
- switch (port) {
- case port_A:
- RCC->APB2PCENR |= RCC_APB2Periph_GPIOA;
- break;
- case port_C:
- RCC->APB2PCENR |= RCC_APB2Periph_GPIOC;
- break;
- case port_D:
- RCC->APB2PCENR |= RCC_APB2Periph_GPIOD;
- break;
- case port_none:
- break;
- }
-}
-
-
-
-void pinMode(enum GPIOpins pin, enum GPIOpinMode mode) {
- GPIO_TypeDef * GPIOx;
- uint16_t PinOffset;
-
- GPIOx = GPIOA+(pin>>3);
- PinOffset = (pin & 0x7)<<2;
-
- GPIOx->CFGLR &= ~(0b1111<<PinOffset); // zero the 4 configuration bits
-
- uint8_t target_pin_state = pinState_nochange; // by default, pin shall retain its state
-
- uint8_t modeMask = 0; // configuration mask
-
- switch (mode) {
- case pinMode_I_floating:
- modeMask = GPIO_CNF_IN_FLOATING;
- break;
- case pinMode_I_pullUp:
- modeMask = GPIO_CNF_IN_PUPD;
- target_pin_state = pinState_high;
- break;
- case pinMode_I_pullDown:
- modeMask = GPIO_CNF_IN_PUPD;
- target_pin_state = pinState_low;
- break;
- case pinMode_I_analog:
- modeMask = GPIO_CNF_IN_ANALOG;
- break;
- case pinMode_O_pushPull:
- modeMask = GPIO_Speed_10MHz | GPIO_CNF_OUT_PP;
- break;
- case pinMode_O_openDrain:
- modeMask = GPIO_Speed_10MHz | GPIO_CNF_OUT_OD;
- break;
- case pinMode_O_pushPullMux:
- modeMask = GPIO_Speed_10MHz | GPIO_CNF_OUT_PP_AF;
- break;
- case pinMode_O_openDrainMux:
- modeMask = GPIO_Speed_10MHz | GPIO_CNF_OUT_OD_AF;
- break;
- }
-
- // wirte mask to CFGR
- GPIOx->CFGLR |= modeMask<<PinOffset;
-
- // set pin state
- if (target_pin_state > pinState_nochange) {
- digitalWrite(pin, target_pin_state - 1);
- }
-}
-
-
-
-void digitalWrite(enum GPIOpins pin, uint8_t value) {
- // no checks given whether pin is currently being toggled by timer! your output trannys are in your hands! beware the magic smoke!
- GPIO_TypeDef * GPIOx;
- uint16_t PinOffset = 0;
-
- if (pin <= pin_A2) {
- GPIOx = GPIOA;
- PinOffset = pin;
- }
- else if (pin <= pin_C7) {
- GPIOx = GPIOC;
- PinOffset = (pin - 16);
- }
- else if (pin <= pin_D7) {
- GPIOx = GPIOD;
- PinOffset = (pin - 24);
- }
- else {
- return;
- }
-
- if (value) {
- GPIOx-> BSHR |= 1 << PinOffset;
- }
- else {
- GPIOx-> BSHR |= 1 << (16 + PinOffset);
- }
-}
-
-
-
-uint8_t digitalRead(uint8_t pin) {
- GPIO_TypeDef * GPIOx;
- uint16_t PinOffset = 0;
-
- if (pin <= pin_A2) {
- GPIOx = GPIOA;
- PinOffset = pin;
- }
- else if (pin <= pin_C7) {
- GPIOx = GPIOC;
- PinOffset = (pin - 16);
- }
- else if (pin <= pin_D7) {
- GPIOx = GPIOD;
- PinOffset = (pin - 24);
- }
- else {
- return 0;
- }
-
- int8_t result = (GPIOx->INDR >> PinOffset) & 1;
- return result;
-}
-
-
-
-
-
-void ADCinit() {
- // select ADC clock source
- // ADCCLK = 24 MHz => RCC_ADCPRE = 0: divide by 2
- RCC->CFGR0 &= ~(0x1F<<11);
-
- // enable clock to the ADC
- RCC->APB2PCENR |= RCC_APB2Periph_ADC1;
-
- // Reset the ADC to init all regs
- RCC->APB2PRSTR |= RCC_APB2Periph_ADC1;
- RCC->APB2PRSTR &= ~RCC_APB2Periph_ADC1;
-
- // set sampling time for all inputs to 241 cycles
- for (uint8_t i = Ain0_A2; i <= AinVcal; i++) {
- ADCsetSampletime(i, Ast_241cy_default);
- }
-
- // set trigger to software
- ADC1->CTLR2 |= ADC_EXTSEL;
-
- // pre-clear conversion queue
- ADC1->RSQR1 = 0;
- ADC1->RSQR2 = 0;
- ADC1->RSQR3 = 0;
-
- // power the ADC
- ADCsetPower(1);
-}
-
-
-
-void ADCsetSampletime(enum ANALOGinputs input, enum ANALOGsampletimes time) {
- // clear
- ADC1->SAMPTR2 &= ~(0b111)<<(3*input);
- // set
- ADC1->SAMPTR2 |= time<<(3*input); // 0:7 => 3/9/15/30/43/57/73/241 cycles
-}
-
-
-
-void ADCsetPower(uint8_t enable) {
- if (enable) {
- ADC1->CTLR2 |= ADC_ADON;
- if (enable == 1) {
- // auto-cal each time after turning on the ADC
- // can be overridden by calling with enable > 1.
- ADCcalibrate();
- }
- }
- else {
- ADC1->CTLR2 &= ~(ADC_ADON);
- }
-}
-
-
-
-void ADCcalibrate() {
- // reset calibration
- ADC1->CTLR2 |= ADC_RSTCAL;
- while(ADC1->CTLR2 & ADC_RSTCAL);
-
- // calibrate
- ADC1->CTLR2 |= ADC_CAL;
- while(ADC1->CTLR2 & ADC_CAL);
-}
-
-
-
-// inspired by arduinos analogRead()
-uint16_t analogRead(enum ANALOGinputs input) {
- // set mux to selected input
- ADC1->RSQR3 = input;
-
- // may need a delay right here for the mux to actually finish switching??
- // Arduino inserts a full ms delay right here!
-
- // start sw conversion (auto clears)
- ADC1->CTLR2 |= ADC_SWSTART;
-
- // wait for conversion complete
- while(!(ADC1->STATR & ADC_EOC));
-
- // get result
- return ADC1->RDATAR;
-}
diff --git a/examples/GPIO_analogRead/wiring.h b/examples/GPIO_analogRead/wiring.h
deleted file mode 100644
index 3b7d0d74e0a1a8f1d41fca115b4aaeb3901cc8e2..0000000000000000000000000000000000000000
--- a/examples/GPIO_analogRead/wiring.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef WIRING_H
-#define WIRING_H
-
-#include "ch32v003fun.h"
-
-
-
-enum lowhigh {
- low,
- high,
-};
-
-
-
-enum GPIOports{
- port_A,
- port_C,
- port_D,
- port_none,
-};
-
-enum GPIOpins{
- pin_A1 = 1,
- pin_A2,
- pin_C0 = 16,
- pin_C1,
- pin_C2,
- pin_C3,
- pin_C4,
- pin_C5,
- pin_C6,
- pin_C7,
- pin_D0 = 24,
- pin_D1,
- pin_D2,
- pin_D3,
- pin_D4,
- pin_D5,
- pin_D6,
- pin_D7,
- pin_none,
-};
-
-enum GPIOpinMode {
- pinMode_I_floating,
- pinMode_I_pullUp, //pull-mode + ODR(1)
- pinMode_I_pullDown, //pull-mode + ODR(0)
- pinMode_I_analog,
- pinMode_O_pushPull,
- pinMode_O_openDrain,
- pinMode_O_pushPullMux,
- pinMode_O_openDrainMux,
-};
-
-enum GPIOpinState {
- pinState_nochange,
- pinState_low,
- pinState_high,
-};
-
-enum ANALOGinputs {
- Ain0_A2,
- Ain1_A1,
- Ain2_C4,
- Ain3_D2,
- Ain4_D3,
- Ain5_D5,
- Ain6_D6,
- Ain7_D4,
- AinVref,
- AinVcal,
-};
-
-enum ANALOGsampletimes {
- Ast_3cy,
- Ast_9cy,
- Ast_15cy,
- Ast_30cy,
- Ast_43cy,
- Ast_57cy,
- Ast_73cy,
- Ast_241cy_default,
-};
-
-
-enum GPIOports getPort (enum GPIOpins pin);
-
-void portEnable(enum GPIOports port);
-void pinMode(enum GPIOpins pin, enum GPIOpinMode mode);
-void digitalWrite(enum GPIOpins pin, uint8_t value);
-uint8_t digitalRead(uint8_t pin);
-
-void ADCinit();
-void ADCsetPower(uint8_t enable);
-void ADCsetSampletime(enum ANALOGinputs input, enum ANALOGsampletimes time);
-void ADCcalibrate();
-uint16_t analogRead(enum ANALOGinputs input);
-
-#endif // WIRING_H
diff --git a/examples/GPIO/wiring.c b/extralibs/wiring.c
similarity index 98%
rename from examples/GPIO/wiring.c
rename to extralibs/wiring.c
index e0acde1977e48cc74ac45f7b33c123d25e028758..b04f8e46dc07a1832b4332edbc3a0e44b02e427b 100644
--- a/examples/GPIO/wiring.c
+++ b/extralibs/wiring.c
@@ -43,7 +43,7 @@ void pinMode(enum GPIOpins pin, enum GPIOpinMode mode) {
GPIO_TypeDef * GPIOx;
uint16_t PinOffset;
- GPIOx = GPIOA+(pin>>3);
+ GPIOx = (GPIO_TypeDef *)(((uint8_t*)(GPIOA))+(pin>>3)*0x0400);
PinOffset = (pin & 0x7)<<2;
GPIOx->CFGLR &= ~(0b1111<<PinOffset); // zero the 4 configuration bits
diff --git a/examples/GPIO/wiring.h b/extralibs/wiring.h
similarity index 100%
rename from examples/GPIO/wiring.h
rename to extralibs/wiring.h