Adds TL-WR1043NDv2 one-time autoupdater-branch-change package.

ffpb/ffpb-tl-wr1043ndv2-autoupdater-2-stable/Makefile

+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ffpb-tl-wr1043ndv2-autoupdater-2-stable
+PKG_VERSION:=1
+PKG_RELEASE:=$(GLUON_VERSION).$(GLUON_SITE_CODE)-$(GLUON_RELEASE).$(GLUON_CONFIG_VERSION)
+
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ffpb-tl-wr1043ndv2-autoupdater-2-stable
+  SECTION:=ffpb
+  CATEGORY:=Gluon
+  TITLE:=One-Time TP-Link TL-WR1043NDv2 Autoupdater Branch Change
+  DEPENDS:=+gluon-core +busybox
+  MAINTAINER:=Freifunk Paderborn <maschinenraum@paderborn.freifunk.net>
+  URL:=https://git.c3pb.de/freifunk-pb/ffpb-packages
+  SOURCE:=git@git.c3pb.de:freifunk-pb/ffpb-packages.git
+endef
+
+define Package/ffpb-tl-wr1043ndv2-autoupdater-2-stable/description
+	We supported the TP-Link TL-WR1043NDv2 hardware already in an early
+	phase in the development of Gluon 2014.4 by building custom firmware
+	and published them in the testing branch (and later also in the
+	stable branch). As a device with quite a lot of CPU-Power, it is used
+	in some rather crowded environments in bars and stores. It is unclear,
+	though, which update stream got configured by the users in this scenario.
+
+	As this particular piece of hardware is now officially supported by
+	Gluon with version 2014.4, we are going to set the autoupdater branch
+	to "stable" on ALL of these devices, such that development can be cont-
+	inued in the testing & experimental branches without interfering the
+	use of the nodes at our "early adopters".
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Package/ffpb-tl-wr1043ndv2-autoupdater-2-stable/install
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/90-tl-wr1043nd-v2-autoupdater-to-stable $(1)/etc/uci-defaults/
+endef
+
+$(eval $(call BuildPackage,ffpb-tl-wr1043ndv2-autoupdater-2-stable))

ffpb/ffpb-tl-wr1043ndv2-autoupdater-2-stable/files/etc/uci-defaults/90-tl-wr1043nd-v2-autoupdater-to-stable

+#!/bin/sh
+
+[ "$(cat /tmp/sysinfo/board_name)" == "tl-wr1043nd-v2" ] && \
+  uci set autoupdater.settings.branch="stable" && \
+  uci set autoupdater.settings.enabled=1
+
+exit 0